BTGXF - MR CLEAN SOFT CLEANER
- MSDS: BTGXF
- Manufacturer: PROCTER AND GAMBLE
- Product Name: MR CLEAN SOFT CLEANER
- National Stock Number: 7930-00N043761
Product Identification
Product ID:MR CLEAN SOFT CLEANER
MSDS Date:05/01/1990
FSC:7930
NIIN:00N043761
MSDS Number: BTGXF
Responsible Party
CINCINNATI, OH 45241-2422
US
Emergency Phone: 800-543-1745
Info Phone: 800-543-1745
Cage: DO549
Contractor
Telephone: 513-562-0796
Cage: 74188
Ingredients
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15MG/M3 TDUST;5 RESP
ACGIH TLV: 10MG/M3 TDUST
SURFACTANTS
OSHA PEL N/K
ACGIH TLV: N/K
SOLVENT
OSHA PEL N/K
ACGIH TLV: N/K
QUALITY CONTROL AGENTS
OSHA PEL N/K
ACGIH TLV: N/K
PERFUME
OSHA PEL N/K
ACGIH TLV: N/K
COLORANTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MILD EYE & SKIN IRRITANT. PROLONGED
SKIN CONTACT OR INSTILLATION INTO EYE MAY RESULT IN TRANSIENT
SUPERFICIAL EFFECTS SIMILAR TO THOSE PRODUCED BY MILD TOILET SOAPS
& DETERGENTS. ORAL INGESTION MAY RE SULT IN MILD GASTROINTESTINAL
IRRITATION W/NAUSEA, VOMITING OR DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:USE ON IRRITATED OR EXTREMELY DRY
SKIN MAY AGGRAVATE THE EXISTING CONDITION.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTF
RESP) . EYES:FLUSH THOROUGHLY W/WATER FOR AT LEAST 15 MINUTES.
INGEST:DILUTE W/FLUIDS & TREAT SYMPTOMATICALLY. SKIN:RINSE EXPOSED
AREA & DISCONTINUE USE.
Fire Fighting
Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, "ALCOHOL" FOAM, OR
CO2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . USE WATER TO KEEP FIRE EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:NONE; MATERIALS MUST BE HEATED
CONSIDERABLY FOR IGNITION TO OCCUR.
Accidental Release
Spill Release Procedures:USE WATER SPRAY TO DILUTE &/OR WASH AWAY
SPILLS TO AVOID EXPOSURE & TO PROTECT PERSONS WORKING TO
STOP/REPAIR LEAK. COLLECT & PLACE IN A SUITABLE CONTAINER. SORBENTS
MAY BE USED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, VENTILATED AREA.
Other Precautions:NONE REQUIRED.
Exposure Controls
Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL (GENERAL): ACCEPTABLE.
Protective Gloves:FOR PRLNG CONT, USE RUB NEOPRENE GLOVES.
Eye Protection:ANSI APVD CHEMICAL SAFETY GOGGLES
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.28 (H2O=1)
Solubility in Water:30% INSOLUBLE
Appearance and Odor:LIGHT YELLOW THIXOTROPIC LIQUID; CITRUS ODOR.
Percent Volatiles by Volume:70
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:ALL QUANTITIES:FLUSH DOWN SEWER DRAIN W/EXCESS
OF WATER; RESIDUAL SOLID MATERIAL CAN BE DISPOSED OF AS DRY SCRAP.
DISPOSAL IS TO BE PERFORMED IN COMPLIANCE W/ALL APPLICABLE FEDERAL
STATE & LOCAL REGUL ATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.